What are the safety matters of stamping robot operation?

Stamping robot operation is an important work in the stamping machinery processing process, which is of great significance to the safety of the operators. In order to guarantee the safety of the stamping robot operation process, the following are some matters that need attention:

1. The operator must be familiar with the structure and working principle of the manipulator, and understand its operation specifications and safety requirements. It is forbidden to operate the manipulator without relevant training and guidance. 2.

2. Before operating the manipulator, it must be inspected and maintained to ensure that its mechanical structure is intact, and that the oil lubrication and electrical system work properly. If abnormalities are found, the operation should be terminated immediately and maintenance personnel should be notified to handle the situation.

3. Before operating the manipulator, the operator must wear personal protective equipment (PPE) that meets the safety requirements, including overalls, safety shoes, gloves, goggles, etc. The operator must also wear a protective jacket and a safety belt to protect the hands. Especially for hand protection, suitable gloves must be worn to prevent injury.

4. During the operation of the manipulator, the operator must remain awake and focused, must not drink, smoke or take narcotic drugs, and must not doze off, etc., which could lead to inadvertent operation.

5. It is strictly prohibited to carry out any maintenance, cleaning or adjustment work while the manipulator is being operated, so as not to cause safety accidents.

6. when the manipulator encounters abnormal conditions, such as noise, vibration, odor, smoke, etc., the operator should immediately stop the operation and notify the relevant personnel for overhaul and treatment.

7. During the operation of the manipulator, it is strictly prohibited to bring hands or other objects close to the moving parts of the manipulator. Especially for the clamping or rotating parts, it is necessary to keep a safe distance so as not to cause pinching or bumping.

8. Obvious safety warning signs must be set up around the operating area of the manipulator to remind the surrounding personnel to pay attention to safety, and to keep the area clean and unobstructed.

9. Before operating the manipulator, the stamping molds and workpieces must be inspected to ensure the dimensional accuracy of the workpieces and the integrity of the molds, in order to prevent problems from occurring during the operation.

10. During the operation of the manipulator, the operator should always keep the operation status of the manipulator under observation, and should stop the machine and deal with it in time if it encounters any abnormal situation.

11. During the operation of the manipulator, the operator should maintain good communication and coordination, and keep a proper distance between the operator and other operators and equipment to avoid mutual interference and collision.

12. During the operation of the manipulator, the operator should operate in strict accordance with the operation specifications and process requirements, and cannot change the operation parameters and process parameters without authorization.

13. The operator should carry out regular self-inspection and inspection of the safety of the operation of the manipulator, and find out the problems in time to deal with and repair them, and report them to the relevant personnel in time.

14. During the operation of the manipulator, the operator should keep the working area around the manipulator clean and tidy, and should not pile up sundries and debris, so as not to affect the safety of operation.

15. During the operation of the manipulator, the operator must strictly abide by the relevant safety regulations and operating procedures, and put an end to irregular operating behavior, in order to ensure the safety and reliability of the operation.

The above are some important matters of stamping robot operation safety, the operator must strictly comply with the robot operation, and always maintain the importance of the operation of safety and vigilance. Only to ensure the safety of the operation of the robot, in order to ensure the safety and efficiency of the entire stamping process.